AMSOIL Synthetic 5W-30
Tractor Hydraulic/Transmission Oil

• Eliminates seasonal oil changes
• Cooler operation
• Smooth brake operation
• Suppresses break noise
• Controls fade and spongy hydraulic response
• Correct and decisive multi-disc/clutch operation
• Conditions seals and hoses
• Reduces oil leaks
• Extends equipment life, even under severe conditions
• Universal fluid -– consolidates inventory, no misapplications
• Extends oil drain intervals

Excellent Protection in Temperature Extremes

AMSOIL Synthetic Tractor Hydraulic/Transmission Oil operates over a wide temperature range. It has a high viscosity index (VI) to maintain its lubricity at high operating temperatures, and it flows at temperatures as low as -47°F (-44°C) for improved equipment operation and wear protection at low temperatures. Synthetic Tractor Hydraulic/Transmission Oil exceeds the most demanding “all weather” specifications of both Ford New Holland FNHA-2-C-200 & 2-C-201 and John Deere J20C & J20D, eliminating the need for seasonal oil changes.

Outstanding Wear Protection

AMSOIL Synthetic Tractor Hydraulic/Transmission Oil contains superior anti-wear additives to provide protection from scoring and gear wear under all load conditions. It extends equipment life, even under severe conditions, and increases pump and valve life. It may be used in final drives calling for a UTTO.

Equipment Runs 20º to 50°F Cooler

Excess heat is a major enemy of hydraulic/transmission fluids and most hydraulic/transmission failures are caused by contamination or breakdown of the hydraulic fluid. AMSOIL Synthetic Tractor Hydraulic/Transmission Oil is highly resistant to heat breakdown and chemical changes. With AMSOIL Synthetic Tractor Hydraulic/Transmission Oil, equipment runs 20º to 50°F cooler. Cooler operation increases equipment life, especially for hoses, which are susceptible to heat damage.

Suppresses Wet Brake Chatter

AMSOIL Synthetic Tractor Hydraulic/Transmission Oil is formulated with durable friction modifier additives that effectively suppress wet brake chatter. When the friction modifiers in conventional hydraulic/transmission oils break down, an imbalance of pressure occurs in the tractor's brake system, causing uncontrollable vibrations. Unlike conventional oils, the premium-quality friction modifiers in AMSOIL Synthetic Tractor Hydraulic/Transmission Oil remain intact throughout the oil's service life for smooth, continuous, long-term brake operation.

Resists Foaming for Optimum Oil Pressure

AMSOIL Synthetic Tractor Hydraulic/Transmission Oil resists foaming. Foaming reduces hydraulic oil pressure and diminishes the lubricating protection provided by the oil. AMSOIL Synthetic Tractor Hydraulic/Transmission Oil's resistance to foam provides rapid air release, cooler operation, smooth brake operation and control over fade and spongy hydraulic response. It resists foaming even when the reservoir is low.

Superior Protection Against Rust and Corrosion During Equipment Storage

AMSOIL Synthetic Tractor Hydraulic/Transmission Oil provides superior protection against rust and corrosion, an important form of protection during equipment storage.

Conditions Seals and Hoses

AMSOIL Synthetic Tractor Hydraulic/Transmission Oil contains seal and hose conditioners, providing seal and hose flexibility, positive seal seating, reduced oil leaking, fewer blown hoses and extended seal and hose life. AMSOIL Synthetic Tractor Hydraulic/Transmission Oil is compatible with all seal materials.

Simplifies Inventories and Prevents Misapplications

AMSOIL Synthetic Tractor Hydraulic/Transmission Oil is a universal fluid that greatly reduces the need for specialized fluid inventories and the possibilities of misapplication, eliminating confusion and simplifying inventory requirements.

Extended Service Life

The durability of AMSOIL Synthetic Tractor Hydraulic/Transmission Oil allows longer drain intervals than those of conventional fluids. Oil analysis is recommended to determine specific oil drain interval. For more information about oil analysis, visit our Oil Analyzers, Inc. page. Oil Analyzers, Inc., a division of AMSOIL, Inc., provides cost effective, quality oil analysis services.
     To install AMSOIL Hydraulic/Transmission Oil in a hydraulic system, drain the existing hydraulic/transmission oil, change filters and install AMSOIL Synthetic Tractor Hydraulic/Transmission Oil.

Applications

AMSOIL Synthetic Tractor Hydraulic/Transmission Oil is recommended for equipment combinations of transmissions, hydraulic systems, final drives, power take-off systems and wet brakes operating in "all weather" hot and cold temperatures, including, but not limited to, the following:

• Farm tractors and equipment
• Off road equipment:
  • Loaders
  • Backhoes
  • Bulldozers
  • Tractors
  • Logging equipment

• Fork lift trucks
• Pavement rollers
• Ditchers
• Concrete formers
• Lawn tractor hydrostatic transmissions
• Golf course mower hydrostatic systems
• 4x4 ATV models with wet brake differentials

• ARCO Tractor Fluid
• BP Tractran UTH
• Case Hytran
• Chevron Torque Fluid
• Chevron Tractor Hydraulic Fluid
• Conoco Power-Tran III Fluid
• Conoco Farm Master
• Gulf Universal Tractor Fluid
• John Deere Hy-Gard
• Kendall HYKEN 052

• Kubota UDT
• Lubrication Engineers 7500
• Lubriplate UTF C-4
• New Holland, Ford M2C134-D & FNHA-2-C-200.00 & 201
• Mobilfluid 300, 350 and 424
• Pennzoil HYDRA-TRANS
• Phillips HG Fluid
• Royal Purple SYN-TRACTOR III WG
• Shell Donax TD

Performance Requirements

AMSOIL Synthetic Tractor Hydraulic/Transmission Oil is recommended for applications that require any of the listed specifications on the AMSOIL Corporate website. Click here to see an up-to-date listing.

Check It Out!